Every emulation is running fine, but C128 crashes immediately after invocation. I recognized that Vice 3.5 is an old version, the actual version is 3.8.
I installed 3.8 but this tells me something about some missing libs that are only available with Bookworm. Upgraded to Bookworm but this ended in a total disaster without COS GUI but only terminal output. So I reinstalled everything from scratch, back to original COS2.0. All emulations are running fine but C128 crashes. Do you have any idea?
C128 Emulation Crash (Issue?)
-
- Posts: 2
- pinterest Kuchnie na Wymiar Warszawa
- Joined: Sat Oct 19, 2024 2:26 pm
- Contact:
Re: C128 crash
Did you follow the instructions and tips available from top menu?
System --> Commodore OS --> Cloanto Commodore ROM Setup
System --> Commodore OS --> Cloanto Commodore ROM Setup
Commodore OS creator. Site Admin. Owns: C64, C128D(Sidekick64), A500, A1000(piStorm), C64x(i7)
Re: C128 Emulation Crash
I have a licensed C64forever from Cloanto on my Windows partition and installed all the ROMs like stated in the mentioned instruction and let CommodoreOS do the rest of the setup.
Commodore@Commodore /usr/share/commodoreos/roms/8-bit
READY.
ls -l
total 1716
edit by Admin: File list removed.
---------
Which operation would you like to perform? [1/2/3/4]:3
Setting up Commodore 8-bit emulators....
Configuring C64...
Configuring C128...
Configuring VIC-20...
Configuring PLUS/4...
Configuring PET...
Configuring CBM-II...
Configuring Commodore Disk Drives...
Setup complete. Enjoy!!!
---------
C64, VIC-20, PLUS/4, PET, CBM-II are running still fine.
Commodore@Commodore /usr/share/commodoreos/roms/8-bit
READY.
ls -l
total 1716
edit by Admin: File list removed.
---------
Which operation would you like to perform? [1/2/3/4]:3
Setting up Commodore 8-bit emulators....
Configuring C64...
Configuring C128...
Configuring VIC-20...
Configuring PLUS/4...
Configuring PET...
Configuring CBM-II...
Configuring Commodore Disk Drives...
Setup complete. Enjoy!!!
---------
C64, VIC-20, PLUS/4, PET, CBM-II are running still fine.
Re: C128 Emulation Crash
There may be a problem with Option 3 of the Cloanto 8-bit ROM set up.
Or perhaps there is a corrupted file or a file has been omitted for some reason.
Please select option 1 instead and assuming you have an internet connection.....
Download the free express version of C64 Forever and allow the MSI file to download again.
(I would suggest everyone really just select Option 1 upon a new COS installation)
It should set up all the ROMs correctly and it won't require Windows.
If you purchase a licensed edition you will likely need to copy any extras manually.
Or perhaps there is a corrupted file or a file has been omitted for some reason.
Please select option 1 instead and assuming you have an internet connection.....
Download the free express version of C64 Forever and allow the MSI file to download again.
(I would suggest everyone really just select Option 1 upon a new COS installation)
It should set up all the ROMs correctly and it won't require Windows.
If you purchase a licensed edition you will likely need to copy any extras manually.
Commodore OS creator. Site Admin. Owns: C64, C128D(Sidekick64), A500, A1000(piStorm), C64x(i7)
Re: C128 Emulation Crash (Solved)
Sorry for pinging an old thread but wondering if a resolution was found? I'm running into the same issue. x128 starts and immediately crashes with a segmentation fault. I tried downloading the msi using option 1 and 3 same results.
- DragonByte64
- Posts: 5
- Joined: Fri Nov 08, 2024 5:05 am
- Contact:
Re: C128 Emulation Crash (Solved)
GTK3 vice 3.8 will crash but SDL2 vice 3.8 will works.
https://vice-emu.sourceforge.io/index.html#download
place the unzipped files in live-usb-storage and run it from there.
Good luck.
https://vice-emu.sourceforge.io/index.html#download
place the unzipped files in live-usb-storage and run it from there.
Good luck.
DRAGONBYTE64
Re: C128 Emulation Crash (Solved)
It's weird. Some things run just fine and others crash out.
Something else to consider is that there may be file corruption with the C128 software included.
Have you tried the emulator with a disk image sourced externally?
I've certainly not encountered an issue when left at the C128 READY prompt.
Something else to consider is that there may be file corruption with the C128 software included.
Have you tried the emulator with a disk image sourced externally?
I've certainly not encountered an issue when left at the C128 READY prompt.
Commodore OS creator. Site Admin. Owns: C64, C128D(Sidekick64), A500, A1000(piStorm), C64x(i7)
Who is online
Users browsing this forum: No registered users and 0 guests